ASQ Lean Six Sigma Certification: What ASQ Actually Offers
What separates Six Sigma from Lean Six Sigma, which ASQ credential covers the Green Belt level and what to check before you choose a course.
In this guide
- What is the difference between Six Sigma and Lean Six Sigma?
- Does ASQ offer a Lean Six Sigma certification?
- Does the Six Sigma Green Belt cover Lean?
- What does the ASQ Six Sigma Green Belt exam look like?
- Who can sit the ASQ Six Sigma Green Belt exam?
- How do you choose between Six Sigma and Lean Six Sigma training?
- What should you do next?
- Frequently asked questions
If you have been looking at process improvement certifications, you have probably seen two names: Six Sigma and Lean Six Sigma. Many people ask whether they are different and which one to pursue.
3FOLD Training is asked this often by learners preparing for ASQ (American Society for Quality) exams. This guide explains the difference between the two terms, what ASQ publishes about its Six Sigma Green Belt and how to compare courses.
Quick answer
Six Sigma is a data-driven method for reducing variation and defects, usually through the DMAIC cycle. Lean is a set of methods for removing waste and improving flow, and Lean Six Sigma combines the two. ASQ’s Green Belt credential is titled Certified Six Sigma Green Belt (CSSGB®), and 3FOLD’s course page says its preparation course covers Lean principles and Lean tools inside the DMAIC modules, so you do not choose between Six Sigma and Lean to prepare for it.
| Short answer | The names differ, but the ASQ credential is the Certified Six Sigma Green Belt |
| Six Sigma focus | Reducing variation and defects with data and statistics |
| Lean focus | Removing waste and improving flow |
| Lean Six Sigma | A combined approach used by many training providers |
| ASQ credential | Certified Six Sigma Green Belt (CSSGB®) |
| Exam | 110 questions (100 scored), 4 hours 18 minutes, open book |
| Experience | 3 years of full-time, paid work in one or more areas of the Body of Knowledge |
What is the difference between Six Sigma and Lean Six Sigma?
Six Sigma targets variation and defects, while Lean targets waste and delay, and Lean Six Sigma uses both together.
| Point | Six Sigma | Lean |
|---|---|---|
| Main aim | Reduce variation and defects | Remove waste and improve flow |
| Typical method | DMAIC: Define, Measure, Analyze, Improve, Control | Value stream mapping, 5S, pull systems and waste reduction |
| Typical question | Why does the result vary? | Which steps add no value? |
| Main tools | Statistics, control charts, hypothesis tests | Process maps, visual management, flow and takt time |
| Origin | Developed in manufacturing quality programmes in the 1980s | Grew out of the Toyota Production System |
In practice the two overlap. A project to cut order errors may use Lean to remove unnecessary hand-offs and Six Sigma to measure and control the remaining variation. Many training providers use the name Lean Six Sigma to signal that both sets of tools are taught.
Does ASQ offer a Lean Six Sigma certification?
ASQ’s Green Belt credential is titled Certified Six Sigma Green Belt, and ASQ’s Green Belt page refers to Six Sigma and does not use the name Lean Six Sigma.
ASQ describes the credential as the Six Sigma Green Belt (CSSGB®). When you search for an ASQ Lean Six Sigma certification, the credential you are looking for is this one. You can read the exam details on the ASQ Six Sigma Green Belt page. Check ASQ’s website for any change to its certification titles.
Note: Course providers choose their own names. A Lean Six Sigma Green Belt from a private provider is not the same credential as ASQ’s CSSGB®, so compare the awarding body, not only the course name.
Does the ASQ Six Sigma Green Belt cover Lean?
3FOLD’s Green Belt course covers Lean principles and Lean tools across its DMAIC modules, aligned to the ASQ Body of Knowledge.
According to 3FOLD Training’s course outline, the first module covers Six Sigma and the organization, including Lean principles. The Improve module includes Lean tools for process improvement, and the Control module includes Lean tools for sustaining process control. The course also covers waste reduction and Kaizen events.
- Overview: Six Sigma and the organization, Lean principles and Design for Six Sigma.
- Define: project identification, voice of the customer, project management and team dynamics.
- Measure: process analysis, probability and statistics, data collection, measurement system analysis and process capability.
- Analyze: exploratory data analysis and hypothesis testing.
- Improve: design of experiments, root cause analysis and Lean tools.
- Control: statistical process control, control plans and Lean tools.
Common Lean tools such as 5S, value stream mapping and Just-In-Time are often taught alongside DMAIC. Download the Body of Knowledge from ASQ and check the exact topic list for the current exam, because ASQ publishes the official list and updates it.
Preparing for the ASQ Six Sigma Green Belt exam?
See the self-paced course and ask for a quote.
What does the ASQ Six Sigma Green Belt exam look like?
The computer-based ASQ Six Sigma Green Belt exam has 110 questions, of which 100 are scored, and it lasts 4 hours 18 minutes.
| Item | Detail |
|---|---|
| Computer-based | One part, 110 questions (100 scored and 10 unscored), English only |
| Exam time | 4 hours 18 minutes, with a 4.5-hour appointment |
| Paper and pencil | One part, 100 questions, 4 hours, offered in Mandarin in certain locations |
| Open book | All ASQ exams are open book, and your references must be bound |
ASQ states that all of its examinations are open book. You bring your own references, and ASQ’s page points to its FAQs for the calculator rules. Source: ASQ Six Sigma Green Belt page.
Who can sit the ASQ Six Sigma Green Belt exam?
ASQ asks for three years of full-time, paid work experience in one or more areas of the Six Sigma Green Belt Body of Knowledge.
- The work must be full-time and paid.
- The three years must be in one or more areas of the Body of Knowledge.
- ASQ states that no educational waivers are granted.
Training itself has no prerequisite at 3FOLD, so you can study before you meet the experience requirement. Only sitting the official exam depends on it. Read our guide on how to apply for CMQ certification for a similar ASQ application path.
How do you choose between Six Sigma and Lean Six Sigma training?
Choose by the awarding body and the exam you want, not by the course name.
| Question to ask | Why it matters |
|---|---|
| Who awards the credential? | ASQ’s CSSGB® is issued by ASQ after you pass its exam, not by the training provider |
| What does the certificate say? | A course completion certificate shows training, and the credential is separate |
| Does the course follow the Body of Knowledge? | The exam tests the ASQ list of topics |
| Does it include practice exams? | Practice under time pressure builds speed for a long open-book exam |
3FOLD’s course gives a course completion certificate, and the official CSSGB® credential is issued separately by ASQ after you register for and pass the exam. 3FOLD is not an ASQ-accredited body and offers exam preparation.
What should you do next?
Check your experience against ASQ’s requirement, read the Body of Knowledge, then choose a course aligned to it.
If you are still deciding between levels, read our guides on Lean Six Sigma certification from ASQ and Six Sigma Black Belt training. For ASQ’s quality management route, see ASQ CMQ/OE study material.
Download the ASQ Six Sigma Green Belt Body of Knowledge from ASQ’s page, or start with the ASQ Six Sigma Green Belt course.
Frequently asked questions about Six Sigma and Lean Six Sigma at ASQ
What is the difference between Six Sigma and Lean Six Sigma?
Six Sigma reduces variation and defects using data and the DMAIC cycle, while Lean removes waste and improves flow. Lean Six Sigma combines both approaches, and many training providers use the name to show that both sets of tools are taught.
Does ASQ offer a Lean Six Sigma certification?
ASQ’s Green Belt credential is titled Certified Six Sigma Green Belt (CSSGB®), and its Green Belt page refers to Six Sigma without the name Lean Six Sigma. Check ASQ’s website for its current certification titles.
Does the ASQ Six Sigma Green Belt course cover Lean?
According to 3FOLD Training’s course outline, the Green Belt preparation course covers Lean principles in the overview module, Lean tools in the Improve and Control modules, and waste reduction. ASQ publishes the official Body of Knowledge, so check it for the exam topics.
How many questions are in the ASQ Six Sigma Green Belt exam?
The computer-based ASQ Six Sigma Green Belt exam has 110 questions, of which 100 are scored and 10 are unscored. The exam time is 4 hours 18 minutes. The paper-and-pencil version has 100 questions and lasts four hours.
Is the ASQ Six Sigma Green Belt exam open book?
Yes. ASQ states that all of its examinations are open book. Candidates bring their own references, which must be bound.
What experience do you need for the ASQ Six Sigma Green Belt exam?
ASQ asks for three years of full-time, paid on-the-job experience in one or more areas of the Six Sigma Green Belt Body of Knowledge. ASQ does not grant educational waivers.
Is a Lean Six Sigma Green Belt from another provider the same as the ASQ Six Sigma Green Belt?
No. A provider’s own Lean Six Sigma certificate is issued by that provider, while the ASQ Certified Six Sigma Green Belt is issued by ASQ after you pass its exam.
Does the ASQ Six Sigma Green Belt course give me the CSSGB credential?
No. 3FOLD’s course gives a course completion certificate. The CSSGB® credential is issued separately by ASQ after you register for and pass the exam.
Ready to prepare for the ASQ Six Sigma Green Belt exam?
Ask for a quote on the self-paced course.


Leave a reply